Tag Commercial

With the reduction of fossil fuels and the deterioration of environmental pollution, governments worldwide have actively started encouraging the use of electric vehicles (EVs) to reduce transportation carbon emissions. Because of favorable policies and rising green consciousness, the global electric vehicle market has risen exponentially in the past few years and is expected to continue rising sharply in the coming decade. This rapid increase in EV users has led to an increasing need for charging infrastructure development.

More efficient and conveniently located commercial EV charger solutions are needed to meet the demand, especially in areas where people spend a significant portion of their everyday lives and activities, such as workplaces, shopping centers, restaurants, etc. Developing sufficient fast charging solutions for commercial use will be crucial to further accelerate the mass adoption of electric vehicles and make electronic mobility a common reality.

Types of Commercial EV Chargers

With the EV market growing rapidly, having access to reliable charging options has become crucial for both commercial areas and EV drivers. There are two primary types of commercial EV chargers available: AC EV chargers and DC EV chargers. These different charging solutions serve different purposes, depending on factors such as the location, time drivers spend at a location, and desired charge time.

Both AC and DC chargers have pros and cons considering the application scenario. Understanding these differences is key in determining the optimal charger types for a given commercial setting and drivers’ needs.

1. AC EV Charger

AC chargers leverage alternating current for efficient though comparatively slower charging. The AC current output from the AC charging station is converted into direct current through the on-board charger. Their cost-effectiveness is underscored by a basic design, rendering installation more affordable. With lower grid capacity requirements, AC chargers seamlessly integrate into residential settings. Key aspects of AC EV chargers include:

• Power ratings typically range from 7.4 kW to 22 kW.
• Need to use an on-board charger to assist charging.
• Allow for slower but stable and efficient charging times.
• Generally cheaper to install due to a more basic design than DC EV chargers.
• A practical solution for applications that do not require rapid charging. Best suited for locations where vehicles remain parked for extended periods, e.g., community parking lots where EVs can charge for over 8 hours.

2. DC EV Charger

DC EV chargers have much higher power capacity. It can directly provide DC current for the power battery of electric vehicles without an on-board charger. As the name implies, DC EV chargers can charge an electric vehicle much faster through direct current power. Key aspects of this type of commercial EV charger include:

• Have much higher power capacities from 20 kW up to 262 kW or above.
• Can charge an EV much faster through direct current power.
• Provide a quick charge boost within a short time.
• Some models allow drivers to add 100 miles of range in just 10-30 minutes, such as Beny’s floor-mounted 3 guns DC EV charger.
• Advanced technology makes them the recommended choice for commercial use cases that demand fast charging throughout the day.
• More suitable for application in public spaces, e.g., shopping centers, restaurants, freeways, and gas stations where drivers require faster charging options.
• Require advanced direct current technology and protection mechanisms.

Advantages of High-quality Commercial EV Chargers

As the global EV market continues to grow significantly each year, the need for reliable and convenient public charging infrastructure is becoming increasingly important. High-quality commercial EV charger solutions have risen to satisfy this demand, offering versatile solutions that benefit both drivers and installation sites.

The best commercial EV charging stations offer several key advantages that have led to their increasing popularity among EV drivers and installation sites. Their advanced features empower businesses while supporting the widespread adoption of electric vehicles:

1. Fast Charging Speed

A core advantage of premium commercial EV chargers is their ability to provide ultra-fast charging. The direct current from the DC charger allows rapid battery replenishment, hence alleviating range anxiety. This speed enables convenient charging sessions during brief stops.

For example, an 82kW charger like Beny’s Floor-mounted 3 Guns DC EV Charger allows adding 74 mileage during a 10-minute shopping trip. The function of allowing multiple cars to charge simultaneously also maximizes asset usage. For instance, some EV charger stations can serve 3 vehicles, whereas a slower commercial EV charger might fully charge just one over the same period. Rapid charging options, therefore, further encourage broader EV adoption and improve the convenience and flexibility of electric vehicle charging.

2. Compatible with Various Car Models

As the EV market diversifies, ensuring compatibility with different automakers is important. Premium commercial chargers can usually support various brands and models. This provides future-oriented infrastructure investments for the growing mainstream electric vehicle market. As new automakers enter the electric vehicle space, having universal commercial EV charger standards like CCS and CHAdeMO can eliminate the risk of incompatible chargers and customer confusion.

In this way, drivers are assured that public fast chargers can fuel any electric vehicle they purchase, regardless of manufacturer or model. Broad compatibility standards foster continued EV adoption by removing technology barriers at the charging service point.

3. Intelligent Charging

Advanced commercial chargers feature intelligent OCPP 1.6J protocols that optimize power distribution and charging efficiency. Smart app control, for instance, allows users to view real-time status and historical statistics anytime, anywhere. Compared to simple commercial charging stations, optimized products can increase energy transfer efficiency and adjust the optimal settings. In this way, more kilowatt-hours are delivered during each charging using the same charging hardware.

In addition to this, the smart capabilities ultimately lower operating costs while enhancing customer experience through faster, effective charging.

4. Safety and Durability

Reliability and safety remain top priorities for fostering general EV adoption. High-quality commercial EV charger solutions are engineered to withstand harsh outdoor environments year-round. Chargers need to meet minimum IP55 standards and have a robust shell for complete weatherproof protection. Durable powder-coated steel enclosures protect internal components against wide temperature variability and damage from dirt, water, and impacts.

Commercial charging stations should also be equipped with various protection mechanisms, such as leakage protection, over-voltage, and over-current protection, to avoid damage to the vehicle during charging. Commercial EV chargers nowadays also feature vandal-resistant designs that discourage tampering or theft. Rigorous testing and certification can ensure stable and hazard-free operation even in demanding public applications.

5. User Friendly Design

Well-designed commercial EV chargers ensure accessibility and a convenient charging experience. Products that are equipped with user-friendly and intuitive interfaces can guide drivers step-by-step to charge and check the charging status. Bright touchscreen displays provide simple yet powerful display features.

Apart from this, commercial EV charger solutions these days support supplementary mobile apps that execute vital charging functions remotely. Smart connectivity is very beneficial as it enables timely notifications, payment processing, and remote monitoring/management by users.

Through a user-centric design, renowned commercial EV charger manufacturers have simplified the charging process, making it as intuitive as refueling traditional cars. Their products embrace evolving charging standards and software to remain compatible with the latest vehicle technologies. This fosters relationship-building with EV drivers by ensuring a dependable, future-proof charging experience.

Application Scenarios of Commercial EV Chargers

As EVs continue to grow in popularity, commercial EV charging infrastructure is playing a critical role in accelerating sustainable transportation. Versatile, high-quality chargers can be seen at workplaces, retail centers, entertainment venues, and other common community locations. Common application scenarios of commercial EV chargers include the following:

1. Workplace

The workplace is one of the most important scenarios that needs commercial EV charging infrastructure. Installing chargers in employee parking lots and garages provides EV drivers with convenient options to top up their vehicles every day before departing for home. This ease of refueling removes worries that could otherwise dissuade commuters from choosing electric vehicles.

Over time, supporting the adoption of EVs helps lower the company’s carbon footprint directly. Convenient workplace charging also demonstrates corporate social responsibility while attracting and retaining talent by enhancing EV viability as a daily transportation choice.

2. Shopping Centers

Installing high-powered DC commercial EV chargers near primary entrances or other high-traffic locations in retail can positively impact consumer behavior.

EV drivers who can accept a convenient 30-minute fast charging session are far more likely to linger near stores, dining options, or on-site services instead of immediately departing once their vehicle is ‘refueled.’ This extends average customer dwell times, hence offering opportunities for retailers to leverage those extra minutes spent on consumption.

3. Hotels and Restaurants

For hospitality seeking competitive advantages, offering EV charging stations represents an innovative service that strengthens bonds with EV drivers. Beyond serving the needs of those traveling via electric vehicles, a reliable commercial EV charger solution also serves as a value-added perk that differentiates the service experience.

It enhances user experience as EV drivers grow more inclined to choose hotels or restaurants with convenient refueling stations. EV drivers are more likely to return because their transportation needs will seamlessly sync with lodging or dining visits.

4. Activity Venues

Extending application scenarios include activity venues like stadiums, concert halls, etc. Offering an on-site commercial EV charger solution serves as a unique amenity that gives customers the convenience of using EVs during outings. This helps to increase the usage rate of these places and create a user-friendly experience.

EV charging strengthens location attractiveness since drivers may specifically choose venues that advertise convenient refueling on parking lots. As urban mobility hubs evolve, the ability to charge the vehicle quickly bolsters repeat visits and a positive establishment image.

5. Social Service Areas

Social service facilities like schools, hospitals, city halls, and public parks are natural locations for spreading the adoption of electric vehicles through accessible charging infrastructures. These institutions can set a low-carbon example by installing EV charging infrastructure strategically.

Reliable refueling supports those with EVs to continue running daily without limitations. Over time, improved accessibility at social service facilities can help promote electric vehicle ownership for broader groups. This nurtures sustainable transportation potential across entire communities.

Products Highlight: BENY’s Commercial DC EV Chargers

BENY is an established leader in commercial electric vehicle charging solutions. With 30 years of experience in power electronics technology and a rapidly expanding global install base, the company has become a trusted name for versatile and dependable commercial EV charging infrastructure. They specialize in product design, testing, and manufacturing quality commercial EV charger hardware, and over the years, have earned the trust of many commercial customers around the globe.

At BENY, they apply rigorous quality control and manufacturing standards to produce charging systems that are well-known for high reliability. Their commitment to customer satisfaction through responding quickly to issues has earned them a prominent reputation among users, businesses, and institutions. As EV adoption accelerates globally, they will continue to advance the cutting-edge commercial EV chargers with intelligent management features to optimize energy efficiency, operations, and the EV driver experience.

In the commercial EV charging stations, BENY offers a wide range of products. Their top three offerings include the Floor-mounted 2 Guns DC EV Charger, the Floor-mounted 3 Guns DC EV Charger, and the Wall-mounted DC EV Charger. Together, these products serve a range of commercial client needs, from small yards to major transit centers.

1. Floor-mounted 2 Guns DC EV Charger

The Floor-mounted 2 Guns DC EV Charger is a versatile floor-standing commercial EV charger designed for various applications, such as residence, workplace, and parking. Available in various power configurations, it provides reliable, fast charging in capacity-limited environments. With a good design that streamlines installations, the DC EV charger is equipped with many unique features. These include the following:

• 60kW to 240kW charging power capabilities to cover a wide range of fleet vehicle types
• Dual charging guns featuring 2 independent charging ports optional CCS1, CCS2, Chademo
• 9.1-inch intuitive LCD screen to guide users through charging control
• Integrated LED lights indicate charging status for convenient night operation
• OCPP 1.6J protocol facilitates seamless data transmission and smart APP for remote monitoring and fleet management
• IP55 rating enables robust performance in indoor or covered outdoor areas
• The product meets international CE and RoHS standards and is equipped with PEN fault detection for safety and efficiency

2. Floor-mounted 3 Guns DC EV Charger

Floor-mounted 3 Guns DC EV Charger is an enhanced floor-standing commercial EV charger capable of charging 3 vehicles simultaneously. It is ideal for medium-sized commercial fleets, delivering high-powered fast charging through an expanded configuration. With the addition of charging interfaces, it streamlines charging stations for mid-sized commercial depots and parking areas. Its key characteristics include:

• 82kW to 262kW charging power range. It supports a wide needs, from light to heavy-duty EVs
• Triple charging ports featuring 3 independent guns with optional CCS1, CCS2, Chademo, AC
• Large 9.1-inch screen allows for simple and convenient management
• Bright LCD screen with LED light provides a convenient session control experience
• OCPP 1.6J protocol to facilitate data transmission and APP ensures 24/7 monitor and control
• Durable design with an IP55 rating for robust indoor or sheltered outdoor performance
• Built-in electrical protections to prevent overcurrent and AC/DC leakage
• Compatible with all electric vehicles

3. Wall-mounted DC EV Charger

The Wall-mounted DC EV Charger is one of BENY’s most compact charging solutions. It is suitable for locations with limited floor space. This is because its wall mountable design takes up a minimal area while delivering fast and reliable charging. It is ideal for charging single vehicles in areas with limited space, streamlining installation at offices, retail areas, and curbside applications. Its key features include the following:

• 20kW to 40kW charging power range, suitable for charging most EVs
• Single charging outlet with independent charging gun that utilizes the CCS2 connector standard
• 9.1-inch LCD screen allows for simple session control
• Wall-mounted design with vertical configuration to save significant floor area
• OCPP 1.6J supports seamless charging
• IP55 rating and durable design suitable for covered outdoor applications
• The product meets high international standards like CE and RoHS for electrical safety

In addition to the unique characteristics, all these three products share many advanced features. These include:

• Modular Design: Key modular components can be easily swapped out for servicing, upgrades, or capacity increases over time to support rising electricity demands. The modular design minimizes downtime for maintenance or repairs.
• Protections: Sturdy enclosures shield internal hardware from AC/DC leakage, liquids, and particle ingress. Reinforced materials withstand impacts and direct weather exposure, allowing for robust performance even in extreme outdoor climates. Multi-layer protection defends against rain, snow, dust, accidental damage, and vandalism.
• Wi-Fi and 4G Connectivity: Built-in connectivity through EVBox BusinessLine enables constant remote monitoring of real-time data on energy usage, temperatures, errors, and more. It also facilitates online updates to ensure that the commercial EV charger always has the latest software. This connectivity also supports remote maintenance to allow immediate fault analysis without long-term delay.
• Universally Compatible: These commercial EV chargers are universally compatible with all electric vehicles. Furthermore, constant firmware updates to BENY’s EV chargers keep them compatible with new vehicle models.
• Integrated kWh meter: It facilitates accurate, easy measurements of the energy that EV charging is using.
• Customized Branding: BENY’s dependable OEM/ODM service allows clients to customize advanced commercial EV chargers to increase brand recognition.

BENY backs premium-grade products with strong aftersales support. All the above-listed commercial EV chargers come with a 12-month warranty. You can also optionally extend coverage terms through extended warranties and tailored service agreements. They provide technical support to resolve issues, further benefiting customers in the long-term use of their charging infrastructure. This combined function and protection establishes their solutions as a trusted investment in the transition to sustainable mobility.

Conclusion

The growing demand for commercial EV charging solutions worldwide presents a huge market opportunity for businesses. As urban people adopt electric vehicles at rising rates, installing safe and reliable high-powered charging stations on commercial venues not only supports the transition toward more sustainable urban transportation networks but also stands to directly boost popularity, traffic, and customer retention. Moreover, businesses can gain a valued competitive advantage among environmentally conscious consumer and client segments.

Established brands like BENY, with years of experience, continue innovating cutting-edge technologies that reliably charge this evolution. Their commercial electric vehicle chargers empower the growing number of cities, businesses, and drivers embracing electrical transportation. Their stable, high-power products and solutions meet the demands of public installation environments. Visit their website to learn more about this company or explore the diverse portfolio of commercial EV chargers.

Durability is a key factor in anything that concerns business, and this is especially true in the realm of commercial trucks. The wear and tear of daily operations, challenging road conditions and the need to protect valuable cargo demand robust solutions. Investing in durability goes beyond the inherent strength of the truck itself; it involves incorporating strategic truck accessoires that enhance resilience, protect assets and ensure the longevity of the vehicle. 

Common Truck Accessories to Protect Your Ride

Some of the accessories designed to fortify commercial vehicles for their demanding journeys are: 

• Grille Guards – The front end of a truck is often the first to encounter obstacles, from road debris to wildlife. Grille guards serve as the first line of defense, providing a protective barrier against potential impacts. Constructed from sturdy materials such as steel or aluminum, these guards not only shield the truck’s vital components but also contribute to a rugged aesthetic.
• Bed Liners – For trucks involved in hauling goods, the bed is a critical space that bears the brunt of heavy loads and shifting cargo. Bed liners, made from high-density polyethylene or reinforced rubber, act as a protective layer. They shield the bed from scratches, dents and corrosion, ensuring that the truck’s cargo space remains durable over time.
• Mud Flaps – The undercarriage of a commercial vehicle faces constant exposure to road debris, water and mud. Mud flaps play a crucial role in deflecting these elements, preventing them from reaching sensitive components. Beyond maintaining a cleaner appearance, mud flaps contribute to the overall durability of the truck by reducing the risk of corrosion and damage to the chassis.
• Air Horns – In the realm of both safety and practicality, air horns for trucks stand out as a valuable addition to commercial trucks. Beyond their commanding and attention-grabbing sound, air horns enhance safety by effectively signaling the truck’s presence, particularly in busy or challenging road conditions. This auditory signal contributes to accident prevention and fosters overall road awareness.

Summing Up

Investing in durability is a proactive approach to ensuring the longevity and performance of commercial trucks. The accessories mentioned above serve as strategic reinforcements, fortifying various aspects of the vehicle against the rigors of daily use. As businesses rely on their trucks to navigate challenging terrains and deliver goods safely, the integration of these accessories becomes a matter of longevity. In addition to that, they become a key component of a comprehensive investment in the reliability and resilience of the fleet.

Commercial steam bath generators have become increasingly popular in the wellness and hospitality industries, offering a luxurious and rejuvenating experience for users. Amerec, a leading manufacturer of steam bath generators, has been at the forefront of this industry, providing innovative and reliable solutions. In this article, we will delve into the various applications of commercial steam bath generators by Amerec, highlighting their versatility and the wide range of settings in which they can be utilized.

1. Spa and Wellness Centers:

One of the primary applications of Amerec commercial steam bath generator is in spa and wellness centers. These generators create a soothing and therapeutic steam environment, promoting relaxation and stress relief. The controlled temperature and humidity levels help users unwind and enjoy the full benefits of steam therapy, including improved circulation, skin health, and muscle relaxation.

2. Hotels and Resorts:

High-end hotels and resorts often invest in commercial steam bath generators to enhance their guests’ overall experience. Steam baths can be integrated into spa facilities or even in individual guest rooms for a personalized and luxurious touch. Amerec’s generators provide a reliable and efficient solution for establishments aiming to offer a unique and memorable stay for their guests.

3. Gyms and Fitness Centers:

Integrating steam baths into fitness facilities is gaining popularity as a means to provide holistic wellness services. Amerec’s generators cater to the needs of gyms and fitness centers, offering a post-workout recovery option for patrons. The steam promotes muscle relaxation, accelerates recovery, and complements the overall fitness experience.

4. Healthcare Facilities:

Steam therapy has therapeutic benefits, making commercial steam bath generators suitable for healthcare facilities. These generators can be installed in rehabilitation centers, physical therapy departments, or even in certain spa-like areas within hospitals. Steam baths can aid in the recovery process by promoting joint flexibility, easing muscle tension, and improving overall well-being.

5. Residential Applications:

Amerec’s generators are not limited to commercial settings; they are also well-suited for high-end residential installations. Homeowners seeking a spa-like experience in the comfort of their own space can incorporate steam baths into their bathrooms or dedicated wellness areas. Amerec’s user-friendly controls make it easy for individuals to personalize their steam experience.

6. Corporate Wellness Programs:

Forward-thinking companies are increasingly investing in employee wellness programs, and commercial steam bath generators can play a role in such initiatives. Providing a designated wellness space with steam baths can contribute to stress reduction, employee satisfaction, and overall well-being.

7. Sports and Recreation Facilities:

Sports training facilities, rehabilitation centers for athletes, and recreational sports clubs can benefit from the use of steam baths. Amerec’s generators offer precise control over steam conditions, making them suitable for various sports-related applications, including recovery and relaxation for athletes.

8. Cruise Ships and Yachts:

Luxury cruise ships and yachts are continually seeking ways to elevate the onboard experience for their passengers. Amerec’s commercial steam bath generators can be seamlessly integrated into spa and wellness facilities on these vessels, providing travelers with a rejuvenating escape while at sea. The compact design and efficiency of Amerec generators make them well-suited for the spatial constraints often encountered in maritime environments.

9. Beauty Salons and Aesthetics Clinics:

Beyond traditional spa settings, beauty salons and aesthetics clinics are recognizing the value of incorporating steam baths into their services. Amerec’s generators can enhance facial treatments, promote detoxification, and create a luxurious ambiance for clients. This addition can set establishments apart by offering a holistic and immersive experience for their clientele.

10. Architectural Integration in Homes and Businesses:

Amerec’s generators are not just functional; they are also aesthetically pleasing, allowing for seamless integration into the architectural design of homes and businesses. These generators can be discreetly incorporated into various spaces, adding a touch of sophistication to the overall design. Architects and interior designers can leverage this feature to create visually appealing wellness spaces.

11. Educational and Recreational Facilities:

Universities, fitness-focused schools, and recreational facilities can benefit from the inclusion of steam baths. These environments can offer students and patrons a unique wellness experience, contributing to a more comprehensive approach to health and fitness. Amerec’s generators provide the reliability needed to support frequent use in high-traffic settings.

Note: We would like to recommend Steam & Sauna Experts to buy Amerec bath Generators, Sauna heaters and parts.

12. Eco-Friendly Design and Energy Efficiency:

Amerec is committed to sustainable practices, and their generators often incorporate energy-efficient features. As the demand for eco-friendly solutions rises, the use of commercial steam bath generators aligns with the growing emphasis on green building practices. Amerec’s commitment to energy efficiency ensures that businesses and homeowners can enjoy the benefits of steam baths with minimal environmental impact.

Conclusion:

Amerec’s commercial steam bath generators showcase a remarkable level of versatility, catering to a broad spectrum of industries and settings. From enhancing the luxury quotient in hotels to promoting wellness in healthcare facilities, these generators have proven to be a valuable addition to various environments. As the demand for holistic wellness solutions continues to grow, Amerec’s commitment to innovation ensures that their steam bath generators remain at the forefront of the industry, providing reliable and customizable experiences for users across diverse sectors.